Bancos de trabajo WORK STANDARD
14Páginas

4 COLOURS 87% EXTENSIBLE DRAWERS ELECTRICAL AND PNEUMATIC SYSTEMS WITH CUSTOMISING OPTIONS WIDE RANGE OF SHELVES

TECHNICAL SPECIFICATION COLOUR BENCH METAL COLOURS MULTIPLEX BEECH WOOD 3 BEECH WOOD CROSS LAYERS MULTIPLEX WITH LAMINATE ANDSOLID WOOD EDGES MULTIPLEX WITH LAMINATE ANDSOLID WOOD EDGES LAMINATE COVERED MULTIPLEX LAMINATE COVERED MULTIPLEX DRAWER CABINETS Drawers are supplied with 87% plain extensibility on high-strength ball bearings. The perforated bottom and the slotted walls with 17 mm pitch allow for easy insertion and fastening (through screws) of the metal partitions. BEARING DETAIL FIXED AND ADJUSTABLE LEGS The legs are made of sheet steel with holes on the top for fixing to the...

The walls are provided with 4 perforated uprights so that drawer guides or extensible shelves can be inserted. CYLINDER CLOSURE The closing bar acts as an anti-tilt system when the drawer is extended. The drawer rear hook (A) causes the rear bar (B) to rotate to its closed position. This prevents the operator from simultaneously opening multiple drawers, avoiding a dangerous weight shift to the outside. The cylinder closure is connected via a square section rod (C) to the rear closing assembly, consisting of a rotating element and of the anti-tilt bar. Turning the key (D) operates the cam...

WORKTOP LOAD CAPACITY LENGTH 1300 mm TYPE OF WORKTOP THICKNESS mm Laminóte with solid wood/ 40 1200

WORKTOP LOAD CAPACITY LENGTH 1500 mm TYPE OF WORKTOP THICKNESS mm Multiplex 40 Laminóte with solid wood/ 40 WORKTOP LOAD CAPACITY LENGTH 2000 mm TYPE OF WORKTOP THICKNESS mm jkg| Laminóte with solid wood/ 40 500 Laminóte with solid wood/ 40 800 350 800 WORKTOP LOAD CAPACITY y- TYPE OF WORKTOP THICKNESS mm ¡kg| Laminate with solid wood/ 50 800

MULTIPLEX BEECH WOOD 3 BEECH WOOD CROSS LAYERS MULTIPLEX WITH LAMINATE ANDSOLID WOOD EDGES MULTIPLEX WITH LAMINATE ANDSOLID WOOD EDGES

LAMINATE COVERED MULTIPLEX LAMINATE COVERED MULTIPLEX

WORK STANDARD COVER THICKNESS 12/10 mm IN MICROPERFORATED STEEL FOR MULTIPLEX SHELVES WITH H 20 mm "L"-SHAPING AT THE FRONT AND REAR, RESISTANT TO ABRASION AND EXPOSURE TO OIL AND GREASE COVER THICKNESS 8/10 mm MADE OF STEEL COVERED WITH OIL-PROOF RUBBER 12/10 - 15/10 mm FOR MULTIPLEX SHELVES, H 20 mm, AT THE FRONT AND REAR "L" SHAPING

BENCH LEG FOR ELECTRIC AND PNEUMATIC SYSTEM ART. V Dim. mm PNEUMATIC SYSTEM WITH SINGLE WINDER THE PNEUMATIC SYSTEM INCLUDES: • 1 fix rear inlet with 0 10 mm hose and connector (3/8”) with pin (0 9-12 mm) used to link up to the pneumatic supply by means of an extension hose (not supplied standard). • 1 front winder including 4 metres of hose with an internal diameter of 5,5 and a 1/4” threaded tool connector. • 1 fixed front outlet with 0 10 mm hose and 3/8” threaded connector complete with plug N.B. ALL THE UNIONS (EXCEPT FOR THOSE OF THE WINDER) ARE 3/8”. COLOUR BLACK APPLICABLE ONLY ON...

ELECTRIC SYSTEM The bench legs for power fittings are supplied standard with a side door with a cylinder lock and 2 keys. An electric and/or a pneumatic system can be fitted in these bench legs. The socket box is also fitted standard with a thermo-magnetic switch 2P 230V AC 10A and is connected (with a hard-wearing cable sheath) to a heavy duty socket 220-240V 16A 2P+E at the rear featuring a vertically sliding cover. The system is protected to IP30. THE ELECTRIC SYSTEM INCLUDES A MULTIPLE SOCKET BOX FEATURING 6 TYPE OF SOCKETS:: • 4 sockets for large and small italian plugs 220-250V 10A...

Lateral closure

ART. F BL 9011 00 00 PRE-ASSEMBLING SET FOR CABINET INCLUDING DRILLING AND FIXING SCREWS Central closure Central closure *maximum capacity 80 kg Central closure Central closure*maximum capacity 70 kg